Create world's most efficient flexible organic light-emitting diodes on plastic

Engineerblogger
Nov 6, 2011

Figure 1: Device structure of the flexible OLED. a, Schematic of the OLED device structure on low-cost flexible plastic with metal electrodes. b, Schematic energy-level diagram of the optimized OLED. c, Photograph of a large-area flexible OLED (50 mm × 50 mm) working at high luminance.


Engineering researchers at the University of Toronto have developed the world’s most efficient organic light-emitting diodes (OLEDs) on plastic. This result enables a flexible form factor, not to mention a less costly, alternative to traditional OLED manufacturing, which currently relies on rigid glass.

The results are reported online in the latest issue of Nature Photonics.

OLEDs provide high-contrast and low-energy displays that are rapidly becoming the dominant technology for advanced electronic screens. They are already used in some cell phone and other smaller-scale applications.

Current state-of-the-art OLEDs are produced using heavy-metal doped glass in order to achieve high efficiency and brightness, which makes them expensive to manufacture, heavy, rigid and fragile.

"For years, the biggest excitement behind OLED technologies has been the potential to effectively produce them on flexible plastic," said materials science and engineering Professor Zheng-Hong Lu, the Canada Research Chair (Tier I) in Organic Optoelectronics.

Using plastic can substantially reduce the cost of production, while providing designers with a more durable and flexible material to use in their products.

The research, which was supervised by Lu and led by PhD candidates Zhibin Wang and Michael G. Helander, demonstrated the first high-efficiency OLED on plastic. The performance of their device is comparable with the best glass-based OLEDs, while providing the benefits offered by using plastic.

"This discovery, unlocks the full potential of OLEDs, leading the way to energy-efficient, flexible and impact-resistant displays," said Lu.

Wang and Helander were able to re-construct the property previously limited to glass by using a 50-100 nanometre thick layer of an advanced optical thin-film coating material. This advanced coating technique, when applied on flexible plastic, allowed the team to build the highest efficiency OLED device ever reported with a glass-tree design.

Source: University of Toronto

Additional Information:

• Unlocking the full potential of organic light-emitting diodes on flexible plastic